Skip to main content

LPB

  • Requirements to connect an LPB equipement to the Tower/Bridge
    Here is a view of the parameters you will need to fill in order to create your LPB equipment :
     

    Network requirements :

    First of all, you'll need information for your Tower/Bridge :
    1.  An available segment number and Device number
    PointDexclamationSmall.png The default parameters that we recommend for the segment number is 2 and for the device number 16
     
    Configure Network LPB
     
    mceclip1.png
     

    Equipment requirements :

    In order to read data from equipment you'll have to fill these blanks :
    In the previous example the equipment parameters would be:
    1. Segment number : 1
    2. Device number : 2 or 3
    mceclip2.png

     

    Property requirements :

    Here are the parameters that you'll need to fill if your equipment is not available in our database.
    PointDexclamationSmall.png "Access Type" would be: READ ONLY or WRITE ONLY
     
    For "Data Format" you'll have a list of our supported data format, you'll choose the one corresponding to your property.
     
    If you have any problem, please do not hesitate to contact us: Wattsense Support
    See more