browse
This article lists the details of the technical features, improvements and fixes of the Wattsense solution (User console and boxes embedded software).
Wattsense user console
The User Console is an intuitive web interface where users can perform configuration and management tasks, visualize collected data, set schedules, connect and command field devices in a few clicks thanks to an easy to navigate interface.
Boxes embedded software
The packages are named APPS and BSP.
APPS is the key software component involved in :
- Protocol management
- Backend communication
- Configuration management
BSP is the essential core or layer of software containing hardware-specific drivers and other routines that allow a particular Operating System (OS) to function in a specific hardware environment. It will be customizing our OS to best fit the requirements from the backend as well as the interfaces of our user's applications.
Deployment strategy :
All our connected boxes (Tower or Bridge) connect to our Cloud every 30 minutes to check whether there is a new BPS/APPS to download.
- Partial deployments : we will only release this version at the customer's request, or if it is necessary for your project. This is often the case for the new Lorawan codec, support for new data points type for wired protocols, etc.
- Mass deployments : we'll send the new software version to all connected products. This only happens when we have a major release to deploy (new feature, major bug fix, etc.).
Release Calendar
Date | Version | Comments |
July 2024 | BSP 6.4.2 + APPS 6.5.1 | |
April 2024 | USER CONSOLE RELEASE 2024.04.04 |
|
April 2024 | BSP 6.2.2 + APPS 6.3.4 | |
February 2024 | USER CONSOLE RELEASE 2024.02.15 |
|
February 2024 | BSP 6.1.1 + APPS 6.1.7 | |
August 2023 | BSP 5.7.2 + APPS 5.12.5 | |
September 2023 | APPS 5.12.9 |
Release Notes Details
BSP 6.4.2 + APPS 6.5.1
New
Fixed
|
USER CONSOLE RELEASE 2024.04.04
Features
|
BSP 6.2.2 + APPS 6.3.4
New
Changed
Fixed
|
USER CONSOLE RELEASE 2024.02.15
Features
|
BSP 6.1.1 + APPS 6.1.7
New
Fixed
|
APPS 5.12.9
Fixed
|
APPS 5.12.5
New
Fixed
|
BSP 5.7.2
Fixed
Fixed
|
LoRaWAN sensors
As firmware updates occur, new LoRaWAN sensors are added to the box. Some decodings have been improved. Below you will find a list of the latest modifications concerning the integration of LoRaWAN equipment into the wattsense box.
2024 |
Sensors embedded in the last (BSP 6.4.2 + APPS 6.6.3) firmware |
- Support for properties in Sofrel - IOT-range (Reference temperature, Temperature error and thresholds, Humidity error and thresholds)
- Support for Tetraedre - TRP11
- Support for DVS-Beregnung - Bodenfeuchte
- Support writing target_temperature in MClimate - Wireless Thermostat
- Support for Netvox - R718PB14, R718PB15, R718PB15A
- Support for Sensoterra - Single and Multi-depth soil moisture sensor
- Support for NKE - Clos'O
- Support for MCF88 - MCF-LW12VOC, MCF-LW12TER, MCF-LW12CO2E
- Support for Milesight - CT101
- Support for Atlasen - LEO1, LEO2
- Support reading delta volumes for Axioma - Qalcosonic W1 meter
- Support for Watchnet - TP-101
- Support for Atim - MR4
- Support for writing output 1 state in MCF88 - MCF-LW13IO
- Support for writing output channels in Adeunis - Dry contacts and Dry contacts 2
- Support for writing allowed operating modes and digital input/output for FCT - MClimate
- Support for Netvox - RA0711, RA0713, RA0715
- Support for netvox - R718WB
- Support for Spire Metering Techonology - SpireTap
- Support for Xignal - Mousetrap
- Support for Herholdt Controls - ECSWL03
- Support for nano sensorics - CARBONLESS
- Support for pFlow - F3R Ultrasonic Flowmeter
- Support for Belimo - EP5000 MML
- Support for IQnexus - Digital Input Senssor
- Support for DotVision - Spoony
- Support for MESHSYSTEMS - Reach
- Support for NAS - IM3060
- Support for QALCOSONIC - W1 Extended payload
- Support reading Date/Time for Elvaco - cmi4140
- Support for SEBA - SlimCom Dipper-PT
- Support for TEKTELIC - Sparrow/Pelican, Tundra
- Support for Milesight - WT201
- Support for HBI - EMERGENCY LIGHTING
- Support for Terabee - People Occupancy Counting
- Support for BROWAN - TBMS100
- Support for SENSECORE - KRAKEN
- Support for Dragino - LMDS120
- Support for BMeters - RFM-LR1
- Support decoding of error properties for Adeunis - tempv3 and tempv4
- Support for Nexelec - Origin, Origin+, Guard, Guard+
- Support for LAIIER - Severn WLD
- Support for Netvox - RA02G, RB02C, R602B, RB02B, R719A, R718EA, R718B150, R831D, RA10, R718X, R718N37
- Support for Sontex - Superstatic 789
- Support for reading timestamps in Adeunis - Dry Contacts V2
- Support for TEKTELIC - Seal
- Support for writing state values in NKE - Pilot Wire
- Support for Milesight - VS350, WT301
- Support for Dragino - CPL03
- Support for Decentlab - DL-ATM41
- Support for GWF - RCM-LRW10
- Support for occupancy sensor in Mclimate - Fan Coil Thermostat
- Support for Watteco - Move'O
- Support for Watteco - Monit'O
- Support for reading formaldehyde in Quos - Lucie
- Support for SenseCAP - S2102
- Support Milesight AT101, EM320, EM400, WS203
- Support Dezem Harvylr 36
- Support Watteco NKE Ventil'O
- Support Maddalena SJ EVO
- Extend support to different frames of Maddalena Evo
- Add Adeunis Comfort 2
- Support Mclimate Vicki "14" frame
- Update Siemens Smart Extinguisher
- Support more ranges of Nexelec
- Support NEXELEC RISE, NEXELEC FEEL, NEXELEC SIGN et NEXELEC MOVE
- Support Milesight WT101
- Support for BMeters Hydrocal-M4
- Support for 'attachedBackplate' property in MClimate Vicki
- Support for reading digital input in mcf88 lw13mio
- Support for DIEHL - HRLc-G3
- Support for BECA - BAC006
- Support for SenseCAP - Wireless Air
- Support for DecentLab - DL-PM
- Support for DecentLab - DL-PYR
- Support for Sontex - Superaqua 1
- Support for Milesight - TS101
- Support for Dragino - PS-LB-NA
- Support for reading/writing external temperature for Mclimate - Vicki
- Support for Talkpool - OY1220
- Support for Mclimate - Fan Coil Thermostat
- Support for Netvox - R718UBB
- Support for Netvox - RA08B01
- Support for Netvox - R718PE
- Support for Dragino - LSPH01
- Support for Dragino - D20-LB
- Support for Seeedstudio - S2104
- Support for Seeedstudio - S2106
- Support for Belimo / NanoSense - EP5000
- Support for reading more properties in Iotsens - Air Quality Monitor
- Support for setting target temperature for Milesight - WT101
- Support for H2O Degress - L54120, L54215, L54230
- Support of decoding more packet types in Siemens - WZU (Scheduled Daily Redundant, Compact Tariff, Scheduled Extended+)
- Support for Siemens - SITRANS MAG8000
- Support for MOIZ - Harvestree
- Support for Itron - Cyble 5
- Support for Seeedstudio - S2107
- Support for MAC - Chain2gate - Energy Meter
- Support for Milesight - AM102, TS301/TS302
- Support for Skiply - Smilio
- Support for writing Output 1/2/3/4 in NKE - IN'O
- Support for Maddalena - ElectoMVM, ElectoSonic
- Support of decoding more payload types in Tetraedre - TRP11
- Support for RAKWireless - RAK10701
- Support for tct - E-green
- Support for Seeedstudio - S2105
- Support for Teledyne - Avolta
- Support for Milesight - EM300-MLD
2023 |
Sensors embedded in the last (BSP 5.7.2 + APPS 5.12.5) firmware |
- Support Bmeter IWM-LR3 and IWM-LR4
- Support Dragino LHT65
- Update Dragino vendor code
- Support Ewattch TYNESS-OPT-DIGITAL-2IN
- Support Ewattch TYNESS-OPT-CURR
- Support Iotsens Air quality monitor sensor
- Handle Laird DL response
- Support Milesight VS133
- Support Quos Lucie
- Support Seeedstudio SenseCAP S2103
- Extend support of Tektelic smart room to different versions
- Support Thermokon Novos 3
- Support Zenner Zelsius sensor
- Support Talkpool 0Y1400
- Support Synetica enlink status V
- Support Seedstudio SenseCAP S2101
- Support NKE Kit Lev'O+ Liquid Level
- Support Milesight UC3414
- Support MClimate Open/Close Sensor
- Support Ewattch Squid Pro
- Support Dragino LDDS20
- Support Vutility Hotdrop
- Support Flowactive device
- Support Citilight individual light control
- Support Dragino LLMS01
- Support Ewattch Squid V2
- Read timestamp in ATIM THX
- Support Smartends Brighterbins
- Support Ewattch Ambiance V2
- Added BMeter Hydrodigit-S1
- Added Dingtek Waste bin
- Added DNIL LR210
- Added EMU Professional II
- Supported meter type and battery for Fludia
- Added Honeywell sensor
- Supported Laird battery as number
- Supported flags for Laird RS1xx
- Supported Mutelcor sensors
- Supported Netvox R718A, R809A01, R718F, RA02A, RA02C, RB11E
- Supported NKE Pilot wire output state name
- Added NKE TICs'O
- Support ZHTechIntl Metrix
- Extend parsing for ATIM TM1
- Support ATIM ACW DIND 44, 80 and 88
- Added Socomec BL10-L
- Added ATIM TMxP, MR4, LVL, WL, TCR, THAQ, THX
- Added Elvaco CMi4111
- Added Maddalena MVM ARROWWAN
- Added Netvox R718PB13
- Supported NKE batch
- Added NKE ATM'O
- Added RAK 7431
- Added Seeedstudio SenseCAPS2120
- Added Sitewatch SW060
- Added Socomec BL10-L
- Added Sofrel Hygrometry and CO2, and Temp indoor
- Added Zenner EDC
- Added Elvaco CMi4170
- Added Sembient sensor
- Added MCF88 MCF-LW06424 and B version
- Added battery voltage decoding for NKE Pulse Sens'O
- Added ATIM ACM THI_THO_THM
- Added ATIM AST PIR
- Added ATIM TCR
- Added ATIM MR4
- Added ATIM LVL
- Added ATIM WL
- Added Fludia FM430
- Extended MCF LW12MET decoding
- Added Nexelec Air
- Added NKE PT1000 transceiver
- Added Siemens Smart Extinguisher
- Added Quandify CubicMeter
- Support Mclimate Wireless Thermostat
- Support Decentlab DL-PR23SX, DL-PR21, DL-PR36, DL-PR36CTD
- Support JRI Lora Temp+ T4
- Support ATIM ACW TMxP, LVL, WL, TCR, THAQ
- Extend support of Laird to more frames
- Support Eastron SDM230 and SDM630
- Support Adeunis Dry contact 8170BC
- Support Phases in NKE Tripas'O
- Support NKE Modbus
- Support Robeau read sensor 1 type
- Support Nexelec NextGen and Origin sensor
- Support New frames for Adeunis Dry Contact and Pulse v4
- Extend Atim ACW / LW8-MR4
- Support Ineo Sense NRJ and Pulse
- Support Laird RS1xx sensors
- Support Linovision IOT S500AM1
- Support Merryiot MS10
- Support NAS UM3081
- Support Strega Smart Valve
- Support Thermokon battery property
- Support Vega Vegapulse Air 23
- Support/Fix Milesight WS558V2, VS132, VS330 and GS301
- Fix Baradesign meteowind
- Support Siemens WZU
- Support Dragino LDDS75
- Support Atim ACW/LW8-THX
- Support Ewattch Tyness OPT ANA
- Support Ewattch Tyness OPT DIGITAL-4IN
- Support Milesight EM300-DI
Comments
0 comments
Please sign in to leave a comment.