LoRaWAN codec requirements

LoRaWAN codec requirements

Wattsense can add for free any LoRaWAN sensor provided that they meet the requirements below:
  1. The sensor sends the entire payload of data in one go. Wattsense does not handle fragmented packets sent in several transmissions.
  2. The sensor can be used by anyone. It is not tied to a specific environment.
  3. Wattsense does not require a complex user interface to configure or interpret the sensor's data
  4. The manufacturer is capable to provide the following should you ask or when asked by Wattsense:
    1. Exact reference of the sensor
    2. Technical documentation describing the structure of the payload
    3. (optional) Javascript library of the codec. This will reduce considerably the development time
    4. (optional) A contact from a reseller

    • Related Articles

    • Nouveautés produit : création en masse d’équipements LoRaWAN

      Vous pouvez désormais ajouter plusieurs équipements LoRaWAN à la fois. Cette fonctionnalité est uniquement disponible sur notre console web. Pour ajouter des équipements, accédez au mode de création en masse en suivant les étapes suivantes : Importez ...
    • How can I send a LoRaWAN downlink?

      First of all, make sure that you've followed the installation tutorial here. Step 1 In the selected properties, be sure that you've checked the one called "Encoded downlink message" Note: It's the only property with a "Write" Access type  Step 2 Now ...
    • Requirements to connect a LoRaWAN device to the Box/HUB

      In order to connect your Lorawan device to our Box/HUB you'll need to have in mind these informations: 1. If your Lorawan device is not in our compatibility checker that means that we don't have the associated codec.             -> You will have ...
    • Bulk creation for LoRaWAN equipment

      You can now add multiple LoRaWAN types of equipment at once. This feature is only available on the web console. To add equipment, access the bulk creation mode by going through these steps: Import a CSV file with at least the following info: ...
    • Requirements to connect an LPB equipement to the Box/Hub

      Here is a view of the parameters you will need to fill in order to create your LPB equipment: Network requirements: First of all, you'll need information for your Box/Hub:  An available segment number and Device number The default parameters that we ...