How can I send a LoRaWANn downlink?

How can I send a LoRaWAN downlink?

First of all, make sure that you've followed the installation tutorial here.

Step 1

In the selected properties, be sure that you've checked the one called "Encoded downlink message"


Note: It's the only property with a "Write" Access type 

Step 2

Now that all the requirements are completed, you can send the downlink.



Step 3

1) Fill this blank with the value of your downlink
-> Downlink specifications are explained in sensor manufacturer documentation.

2) Once you click on "Save" the downlink will be sent to the sensor.

Note 1: If you send multiple downlinks they will be stored and sent to the sensor one by one




    • Related Articles

    • Nouveautés produit : création en masse d’équipements LoRaWAN

      Vous pouvez désormais ajouter plusieurs équipements LoRaWAN à la fois. Cette fonctionnalité est uniquement disponible sur notre console web. Pour ajouter des équipements, accédez au mode de création en masse en suivant les étapes suivantes : Importez ...
    • Requirements to connect a LoRaWAN device to the Box/HUB

      In order to connect your Lorawan device to our Box/HUB you'll need to have in mind these informations: 1. If your Lorawan device is not in our compatibility checker that means that we don't have the associated codec.             -> You will have ...
    • LoRaWAN frequency plans supported

      Asia - AS_923_1 All SF5 to SF12 Uplink: 923.20 MHz 923.40 MHz  - 923.60 MHz 923.80 MHz 924.00 MHz 924.20 MHz 924.40 MHz 924.60 MHz Dowblink: 923.2 MHz Asia - AS_923_2 All SF5 to SF12 Uplink: 921.40 MHz 921.60 MHz  - 921.80 MHz 922.00 MHz 922.20 MHz ...
    • LoRaWAN codec requirements

      Wattsense can add for free any LoRaWAN sensor provided that they meet the requirements below: The sensor sends the entire payload of data in one go. Wattsense does not handle fragmented packets sent in several transmissions. The sensor can be used by ...
    • Bulk creation for LoRaWAN equipment

      You can now add multiple LoRaWAN types of equipment at once. This feature is only available on the web console. To add equipment, access the bulk creation mode by going through these steps: Import a CSV file with at least the following info: ...