Checklist to install a Wattsense Box in a Bacnet IP network
|
BACnet
|
IP
|
MS/TP
|
|
|
|
BACnet port (UDP port)
|
R
|
N/A
|
Communication configuration (Baud rate/Parity/Data bit/Stop bit)
|
N/A
|
R
|
R = Required - O = Optional - N/A = Not Applicable
Related Articles
How to register the Wattsense Box in a Loytec L-IP configured server
This topic explains how to register the Wattsense Box into the Loytec L-IP configured server. Before registering the Box, make sure a static IP address is assigned to the Box. 1. Log in into the L-IP using the Internet Explorer browser and its IP ...
Checklist to install a Wattsense Box in a Modbus IP and RS485 network
Modbus IP RTU Slave address* of all equipment If applicable R IP address of all equipment R N/A Modbus register list* (so-called exchange table) of all equipment R R Modbus UDP ports R N/A Network communication configuration (Baud rate/Parity/Data ...
Checklist to install a Wattsense Box in a LON-IP and FT10 network
LonWorks IP FT10 XIF files of each model of equipment R R LNS database in NLC* format R R The IP address of all IP-852 routers* O N/A Login / Password and configuration client port of IP-852 router R N/A R = Required - O = Optional - N/A = Not ...
Troubleshooting LON IP network with the Wattsense box
This topic will give tips for troubleshooting a LON IP setup: Make sure the Wattsense Box has a static IP address configured. Go to Configuration -> Connectors (select the appropriate Ethernet port) Connect to the LON configured server and check the ...
IP networks scenarios with BACnet/IP nodes (and BBMD)
Adding an FD node in a standard topology When speaking about BACnet/IP we are speaking about a protocol running over UDP that has its own layer-based architecture (Data-Link, network, application). The BACnet/IP Data-link layer is the IP's UDP layer ...