Install a Wattsense Box in a LON-IP & FT10 network

Checklist to install a Wattsense Box in a LON-IP and FT10 network

LonWorksIPFT10



XIF files of each model of equipmentRR
LNS database in NLC* formatRR
The IP address of all IP-852 routers*ON/A
Login / Password and configuration client port of IP-852 router   
R N/A
R = Required - O = Optional - N/A = Not Applicable

Notes

  • NLC format is a kind of CSV (Comma-Separate Variable ) format. Usually, an export can be made by NL220 software
  • IP-852 routers are usually L-IP from Loytec or similar
XIF file and LNS database are mandatory for the next steps, in fact they will give you the following information:

Neuron ID and Program ID for your equipment configuration
- NVIndex and SNVT Type for the properties configuration

Here is the information that you will need to fill in order to add LON equipment:


  1. You will need the NeuronID and the ProgramID (you will find this information most of the time in the XIF file)
Here is the information that you will need to fill in order to add a LON Network:



Here is the information that you will need to fill in order to add a LON property:


NB:

Without this information, you won't be able to set up correctly your LON network.