LoRaWAN equipment - Bulk creation

Bulk creation for LoRaWAN equipment

You can now add multiple LoRaWAN types of equipment at once. This feature is only available on the web console. To add equipment, access the bulk creation mode by going through these steps:

Import a CSV file with at least the following info:

  • manufacturer    

  • model    

  • devEUI    

  • appEUI    

  • appKey    

Click on select a codec and choose the codec you want to use. Your device names will be scanned and matched with their Wattsense counterparts. 

To finish, select the properties that you want to synchronize with the Box.

And…🥁 that’s it! You can now add in one go multiple devices with their data points.

We built this new feature with your feedback. Please drop us a line at support@wattsense.com to make it even better or to share with us any other feedback.

Other improvements added to the console:

  • New role for assigning permissions to a user: the maintenance technician. This new role only permits editing alarms history. The rest of the information stays in “read-only”.

  • New field under the Box info to add an external ID. This can be useful, for example, if the Box is installed in a building for which you already have an ID in your real estate database.

    • Related Articles

    • Nouveautés produit : création en masse d’équipements LoRaWAN

      Vous pouvez désormais ajouter plusieurs équipements LoRaWAN à la fois. Cette fonctionnalité est uniquement disponible sur notre console web. Pour ajouter des équipements, accédez au mode de création en masse en suivant les étapes suivantes : Importez ...
    • How can I send a LoRaWAN downlink?

      First of all, make sure that you've followed the installation tutorial here. Step 1 In the selected properties, be sure that you've checked the one called "Encoded downlink message" Note: It's the only property with a "Write" Access type  Step 2 Now ...
    • LoRaWAN codec requirements

      Wattsense can add for free any LoRaWAN sensor provided that they meet the requirements below: The sensor sends the entire payload of data in one go. Wattsense does not handle fragmented packets sent in several transmissions. The sensor can be used by ...
    • Requirements to connect an M-bus equipment to the Box/Hub

      The Mbus bus is a serial bus powered by the master (Box or Hub) with 37V, the Box/Hub can handle natively 3.6mA (3*UL) on the bus. Note: Be sure to check this information on your targeted bus, otherwise it will not work correctly. Hardware ...
    • Requirements to connect a LoRaWAN device to the Box/HUB

      In order to connect your Lorawan device to our Box/HUB you'll need to have in mind these informations: 1. If your Lorawan device is not in our compatibility checker that means that we don't have the associated codec.             -> You will have ...