What is it?
Until now, with a Wattsense Hub, you had to configure the Hub by connecting it to a computer using the Wattsense Desktop Application to set it up.
Starting today, the configuration can be done remotely through the Wattsense web console at https://console.wattsense.com/
How does it work?
The new Hubs have their SIM card activated by default without any additional cost from the start*. Thanks to this, the connection between Wattsense servers and your Hub remains open, and you can enjoy such things as:
- Send a new configuration to your device using the cloud
- No need to be onsite and connected to the HUB to check your configuration
- Benefit from new software updates and security patches automatically
- Make use of new equipment added to our library
All of this without having your data points sent to us and stored in our servers.
Remote Hub Activation
Once connected to your console.wattsense.com account, you'll see your product(s) in the "HUBs" section.
Then click on the "power" button to activate it,
Remote HUB console specifications:
The yellow circle next to your Hub’s name informs you that your Hub is connected to the Wattsense servers without sending any data.
If you want to check the configuration result, you can still activate the switch next to your Hub’s name.
The green circle next to your Hub’s name informs you that your Hub is connected and sending data points values to the Wattsense servers.
By doing so, the data points values are sent to the Wattsense servers but only to allow you to check your configuration. After one hour, the values will be deleted, and we won’t keep any record of them in our database.