Requirements to connect a LON IP equipment to the Tower/Bridge – Wattsense Support Portal

browse

This article is about the requirements to connect a LON IP equipment to the Tower/Bridge.

LonWorks	IP
XIF files of each model of equipment	R
LNS database in NLC* format	R
The IP address of all IP-852 routers*	O
Login / Password and configuration client port of IP-852 router	R

NLC format is a kind of CSV (Comma-Separate Variable ) format. Usually, an export can be made by NL220 software
IP-852 routers are usually L-IP from Loytec or similar

XIF file and LNS database are mandatory for the next steps, in fact they will give you the following information :

Here is the information that you will need to fill in order to add LON equipment :

You will need the NeuronID and the ProgramID (you will find this information most of the time in the XIF file)

Here is the information that you will need to fill in order to add a LON Network :

Here is the information that you will need to fill in order to add a LON property :

Without this information, you won't be able to set up correctly your LON network.

If you have any problem, please do not hesitate to contact us: Wattsense Support