How to configure my ModbusIP gateway? – Wattsense Support Portal

browse

Purpose of the Modbus IP Gateway:

The Modbus IP gateway is designed to act as a Server in a Modbus IP network.

Schematic:

Step 1:

First of all, you'll need to create a new gateway

Step 2:

Then set up the gateway information,

Important information: SlaveID needs to be unique in order to avoid conflict

Step 3:

To add properties in your gateway, select the "Properties" button

Click on the "Add Property" button.

Once in the view, you will be able to select the properties you want to redirect, then click on Save.

Step 4:

Here is the view of the gateway Modbus table

Property configuration:

By clicking on the

button, you will be able to have the details of your gateway property.

Be sure that your Modbus IP client configuration is matching these parameters.

Step 5:

You can also download the Modbus table.

Note

The Modbus table is mandatory in order for you to configure your Modbus IP client, with this table, you'll know how to access the data made available by the Box/HUB